Small Lathe Machines

Being the old and the most useful tool need for the leading generation. In the earlies of 1569, Lathe machines were build-up of wooden material used to carve the shapes of products that were considered as raw. After Industrial Revolution these machines come up with a new advancement in the cutting technology and improvement in the machine speeds. The speed of the machine can be easily varied according to the needs. The cutting tool was changed to the metal and shape was elongated with extra sharpen edges. Today, the up-gradation in the lathe has not only reduced the production cost and manufacturing time but produces a fine output.
Features Of Small Lathe Machines:
1. Backgear: Backgear in mounted at the back of the headstock of Lathe and this helps to increase the turning power and more torque is produced. It runs as faster as 200rpm speed.

2. Screw Cutting: Inch and metrix screw thread can be built accuracy and versatility. Thorough knowledge of different principles of threads as well as procedures of cutting is required. The angle of the thread, depth, major diameter, minor diameter, pitch diameter, thread fit and metric threads are some of the main key factors of screw cutting.

3. Tumble Reverse: The direction of the lead screw and the feed rod is maintained by the tumble gear. The movement of the tumble carriage is from the tailstock to the head stock.

4. T-Slot fitting provision: Vertical mounting of large jobs are done with the help of T-slot fitting provisions. A t-slot cutter or a milling cutter is required. The side milling cutter is used to cut the workpiece in slots equal in width as well as in depth.

5. 2 Morse Taper in Tailstock: The foot stock of the lathe is named to be the tail stock. It is used in conjunction with the rotary table on a milling machine. Tail stock is relative longer than other part of the machines. The functioning of the machine is not fulfilled without tailstock, if its not used then the machine will “CHATTER”

Interesting facts about lathe:
1. You can easily find manyinexpensive lathe that are similar to the expensive one. The quality of the lathe matter to produce a good output. For the entry level inexpensive one are perfect but as the demand and the load on the lower priced machine will form a limiting effect on our work.
2. If you are talking about the machine tools then weight of the machines comes under the main factor. The more heavier your machine, the more rigid and vibration free performance can be seen. The best lathe machines are always heavier than the normal one as if we compare cast-iron lathe with the fabricated one then we will notice that cast iron is heavier than fabricated one.
Esskay machines are the known to be the best manufacturers of heavy Industrial machines such as Lathe Machine, CNC Machine, Drilling Machines etc in Maharashtra, Delhi-NCR, Indore, Mumbai as well as in Indian and international market.